IAI America RCM-GW-PR - Manual (Page 108)

102
PfofiBus Gateway
(3) Inserting a Gateway rack in the network
Drag and drop “ANYBUS-S PDP” in the catalog window over to the master system and insert it as a
module, as shown below.
The address will be set automatically. To change the address that has been set automatically, do so
in the Properties dialog box. This address must correspond to the address switch setting of the
Gateway, as mentioned earlier.
<Rack insertion into the network>
(4) Setting the I/O assignments – Inserting a universal module
Insert a universal module into the rack inserted in the previous step, as shown below. Since the
maximum input/output bytes of the universal module are 64 each, another universal module must be
inserted if there are 10 or more axes.
<Universal module insertion into the rack>