LEDGlow Advanced 3 Million Truck LED Underbody Kit - Manual (Page 4)


P2 Button and Display
o Pressing the P2 button allows you to change the various options within the selected pattern.
 Press and hold this button for 2 seconds to activate. Release this button when the number “1” flashes in the P2
position on the display.
 To select and move to the next option, simply press the P2 button again.
 Note: Once an option is changed, pressing this button again to change another setting will not affect your
previous selection.
 Note: The sound activation mode is on this kit is preset to the on position. If your patterns are not functioning
properly, ensure that the sound activation mode is turned off by referencing the “Sound Activation Mode”
section of the instructions.
o What each P2 number displayed on the control box represents:
 1 – Pattern Selection
1. This allows you to select from 19 customizable patterns using the P3 and P4 buttons.
2. Note: When this is set to 0, no pattern is selected.
 2 – Pattern Speed
1. This allows you to select the speed of the pattern using the P3 and P4 buttons.
2. Speed range is from 0 to 19.
 3 – Primary Color Setting
1. Selects the Primary Color displayed on the kit.
2. This allows you to select from 19 preset color modes using the P4 button. The colors are listed
below. Note: The number before each color represents the number displayed on the P4 portion of the
control box. Setting this kit to a solid color mode or creating your own color is explained below.
 4 – Secondary Color Fade Speed
1. This allows you to control the speed of the secondary color fade in certain patterns using the P3 and
P4 buttons.
2. Fade range is from 0 to 19.
3. A pattern with primary and secondary color options must be selected in order to use this option.
 5 – Changes the Secondary Color
1. This allows you to change the color of the secondary pattern using the P4 button
2. Secondary color numbers correspond with primary color numbers.
3. A pattern with primary and secondary color options must be selected in order to use this option.
 6 – Secondary Pattern Speed
1. This allows you to change the speed of the secondary color that is running through the primary color
using the P3 and P4 buttons.
2. Speed range is from 0 to 19.
3. A pattern with primary and secondary color options must be selected in order to use this option.
 7 – Sound Activation Mode
1. This allows you to put this kit into a sound activation mode using the P4 button.
2. Setting to 0 turns the sound activation mode OFF.
3. Setting to 1 turns the sound activation mode ON.
4. Important: Sound activation is defaulted to the ON position. If your patterns are not working
correctly, ensure that this setting is set to 0.
 8 – Sound Activation Mode Sensitivity
1. Allows you to change the sensitivity of the sound activation mode using the P3 and P4 buttons.
2. Sensitivity range is from 0 to 9.

P3 and P4 Buttons and Display
o Pressing these buttons allows you to cycle through options.
o P3 cycles down through the options.
o P4 cycles up through the options.
2 – Multi Color Mode 11 – Slow Red Fade
3 – Red 12 – Slow Green Fade
4 – Green 13 – Slow Blue Fade
5 – Blue 14 – Slow Yellow Fade
6 – Yellow 15 – Slow Purple Fade
7 – Purple 16 – Slow Teal Fade
8 – Teal 17 – Slow White Fade
9 – White 18 – Slow 7 Color Fade
10 – 7 Color Fade Mode 19 – Million Color Fade Mode