Caution – WARN HY3000 INDUSTRIAL HOIST User Manual

Page 81

Advertising
background image

General Safety Precautions

2

CAUTION

CAUTION

MOVING PARTS ENTANGLEMENT
HAZARD

Failure to observe these instructions could

lead to minor or moderate injury.

General Safety:
Always know your hoist. Take time to fully

read this Installation and Operations Guide

in order to understand your hoist and its

operation.

Never operate this hoist if you are under 16

years of age.

Never operate this hoist when under the

influence of drugs, alcohol or medication.

Never exceed hoist or rope rated capacity.

Double line using a snatch block to reduce

hoist load.

Installation Safety:
Always choose a mounting location that is

sufficiently strong to withstand the maximum

lifting capacity of your hoist.

Always use factory approved mounting

hardware, components, and accessories.

Always use grade 5 or better mounting

hardware.

• Never weld mounting bolts.

Always use care when using longer bolts

than those supplied from factory. Bolts

that are too long can damage the base

and/or prevent the hoist from being mounted

securely.

Always mount the hoist and attach the hook

to the rope’s end loop before connecting the

electrical wiring.

Always spool the rope onto the drum in the

direction specified by the drum rotation label

and/or documentation. This is required for

the automatic brake to function properly.

Always prestretch wire rope and respool

under load before use. Tightly wound wire

rope reduces chances of “binding”, which can

damage the rope.

MOVING PARTS ENTANGLEMENT
HAZARD

Failure to observe these instructions could

lead to minor or moderate injury.

Hoisting Safety:
Always inspect, rope, hook, and slings

before operating hoist. Damaged

components must be replaced before

operation. Protect parts from damage.

Always report any malfunction, unusual

performance, or damage to the hoist.

Never leave remote control plugged into

hoist when rigging or when the hoist is not

being used.

Never hook rope back onto itself. This

damages the rope.

Always remove any element or obstacle that

may interfere with safe operation of the hoist.

Always take time to use appropriate rigging

techniques for a hoist lift.

Never hoist with less than 5 wraps of rope

around the drum, the rope could come loose

from the drum.

Never touch rope or hook while in tension or

under load.

Never touch rope or hook while someone

else is at the control switch or during hoisting

operation.

Always stand clear of rope and load and

keep others away while hoisting.

Always be aware of stability of vehicle and

load during hoisting. Alert all bystanders of

any unstable condition.

Always keep remote control lead clear of the

drum, rope and rigging. Inspect for cracks,

pinches, frayed wires or loose connections.

Replace remote control if damaged.

Always pass remote control through a

window to avoid pinching lead in door when

using remote inside a vehicle.

Never swing or twist loads.

Never leave suspended load unattended.

Hebevorrichtungen von WARN Industries

Erklärung über die begrenzte Garantie für 1 Jahr für kommerzielle Produkte von
WARN®

Warn Industries, Inc. (WARN) garantiert dem Erstkäufer, dass die mechanischen und elektrischen

Komponenten des im Folgenden näher bezeichneten „WARN”-Produkts für die Frist eines (1) Jahres ab

Datum des Erstkaufs frei von Material- und Herstellungsfehlern sind. Diese Garantie gilt ausschließlich für

den Erstkäufer der Produkte. Für den Erhalt von Serviceleistungen im Rahmen dieser Garantie muss WARN

ein Nachweis des Kaufs und Kaufdatums (z.B. Beispiel eine Kopie der Quittung) vorgelegt werden, der von

WARN akzeptiert wird. Diese Garantie deckt weder den Aus- noch den Einbau des Produkts. WARN wird das

defekte Produkt nach eigenem Ermessen reparieren oder ersetzen bzw. den Kaufpreis des defekten Produkts

bzw. der defekten Komponente rückerstatten, wenn das defekte Produkt bzw. die defekte Komponente

innerhalb der Garantiefrist mit freigemachter Sendung an die Kundendienstabteilung von Warn Industries

bzw. an ein von WARN zugelassenes Kundendienstzentrum eingeschickt wird. Der Sendung müssen Name,

Anschrift und Telefonnummer des Käufers sowie eine Beschreibung des Problems und eine Kopie des Belegs

und der Original-Kaufquittung (mit WARN-Seriennummer des defekten Produkts und Kaufdatum) beiliegen.
Diese Garantie erstreckt sich nicht auf (i) Teile oder Komponenten, die im Folgenden ausgeschlossen sind,

oder (ii) ist ungültig, wenn das Produkt durch Unfall, Missbrauch, falschen Gebrauch, Kollision, Überladung,

Modifikation, falsche Anwendung, falschen Einbau oder unsachgemäße Wartung beschädigt wurde. Diese

Garantie ist nichtig, wenn die WARN-Seriennummer entfernt oder unkenntlich gemacht wurde.
DIE BESCHRIEBENE GARANTIE IST DIE EINZIGE GARANTIE. ES GELTEN KEINE ANDEREN

GARANTIEN, WEDER AUSDRÜCKLICH NOCH STILLSCHWEIGEND, EINSCHLIESSLICH, JEDOCH

NICHT AUSSCHLIESSLICH, STILLSCHWEIGENDER GARANTIEN DER MARKTGÄNGIGKEIT ODER DER

EIGNUNG FÜR EINEN BESTIMMTEN ZWECK.
ALLE STILLSCHWEIGENDEN GARANTIEN, DIE VON GESETZ WEGEN NICHT AUSGESCHLOSSEN

WERDEN DÜRFEN, SIND AUF DIE FRIST VON EINEM (1) JAHR AB DATUM DES ERSTKAUFS DES

PRODUKTS BESCHRÄNKT.
WARN HAFTET UNTER KEINEN RECHTSUMSTÄNDEN FÜR BESONDERE, INDIREKTE, ZUFÄLLIGE

ODER FOLGESCHÄDEN (EINSCHLIESSLICH, JEDOCH NICHT AUSSCHLIESSLICH, ENTGANGENER

GEWINNE, AUSFALLZEITEN ODER NUTZUNGSAUSFÄLLE). DIESE HAFTUNG ERFOLGT AUCH DANN

NICHT, WENN WARN VON DER MÖGLICHKEIT SOLCHER SCHÄDEN UNTERRICHTET WURDE.
In manchen Ländern ist der Ausschluss stillschweigender Garantien bzw. der Ausschluss oder die

Beschränkung der Haftung für zufällige oder Folgeschäden bzw. Beschränkungen der Dauer einer solchen

stillschweigenden Haftung gesetzlich nicht zulässig, so dass die oben beschriebene Beschränkung bzw. der

entsprechende Ausschluss auf den Käufer u.U. nicht zutrifft. Der Käufer hat im Rahmen dieser Garantie

spezifische Rechte. Er kann je nach Land weitere Rechte haben.
WARN behält sich das Recht vor, Änderungen am Produktdesign ohne vorherige Mitteilung vorzunehmen.

In Fällen, in denen WARN das Design eines Produkts geändert hat, ist WARN nicht verpflichtet, früher

hergestellte Produkte aufzurüsten oder anderweitig zu modifizieren.
WARN-Händler, -Vertreter und -Mitarbeiter sind nicht befugt, diese Garantie auf irgendeine Weise zu ändern,

zu erweitern oder auszudehnen.
Fragen zur Garantie und zur Reparatur eingeschickter Produkte sollten per Post an die folgende Anschrift

eingereicht werden:

WARN INDUSTRIES, INC.

Customer Service Department

12900 SE Capps Road

Clackamas, OR 97015, USA

+1 800-543-9276

Von dieser Garantie abgedeckte Produkte

Von dieser Garantie nicht abgedeckte Produkte

Kommerzielle Windenprodukte

Lackierungen und Drahtseile für kommerzielle Winden

Kommerzielle Hebevorrichtungen

Lackierungen und Drahtseile für kommerzielle

Hebevorrichtungen

Kommerzielles Zubehör

Lackierungen und Drahtseile

79

Advertising