ZOLL AED Pro Rev A - Manual (Page 14)

C
HAPTER
1 M
AINTENANCE
T
ESTS
1–2 www.zoll.com 9650-0309-01 Rev. A
Preparations for Testing
• Gather the required equipment listed in the next section.
• Perform all the steps within each test procedure in the order specified.
If testing results indicate that the battery pack must be replaced, you will need a fully charged
spare battery pack.
Test Equipment
For some tests, you need one or more of these items:
• ZOLL defibrillation analyzer (universal) adapter cable (8000-0804-01)
• Fluke Impulse 4000 Defibrillator/Pacer Performance Analyzer (Fluke Biomedical/
DNI Nevada) with 1.06 software or higher
The following items are optional:
• ZOLL AED Pro Simulator —
When connected to an AED Pro unit, the simulator can send it various simulated cardiac
rhythms (ventricular fibrillation, normal sinus rhythm, or asystole) and optional simulated
chest compression readings (rate and depth), so that you can test the unit’s response.
• ZOLL Administration Software (ZAS) for Windows 2000, or XP Pro —
When installed on a personal computer that has an IrDA (wireless infrared) interface, the
ZAS application can communicate with an AED Pro unit in nonrescue mode to retrieve its
usage history, hardware and software configuration, and error log. You can also use ZAS to
view or modify the unit’s configurable settings and to retrieve event data.
• ZOLL 3-lead ECG cable (8000-0838)
For ZOLL part numbers, refer to the accessories list in the AED Pro Operator’s Guide.