ZOLL AED Pro Rev A - Manual (Page 25)

Troubleshooting the AED Pro Unit
9650-0309-01 Rev. A ZOLL AED Pro Service Manual 2–3
;
RELEASE SHOCK BUTTON
— Release the Shock button. Wait
until the unit issues the prompt
PRESS FLASHING SHOCK BUTTON
before pressing the button. None.
;
PLUG IN DEFIB CABLE
Note: This prompt appears if an ECG
cable is connected, but the unit
is not configured for ECG
monitoring.
— Check the cable and replace if
necessary.
None.
; RELEASE LEFT SOFTKEY
or
;
RELEASE RIGHT SOFTKEY
— Release the softkey. None.
Table 2-1. General Issues (continued)
Symptom Operator Action Technical Action