Changing the user name and password – Actiontec electronic Wireless DSL Gateway GT704WG-QW04 User Manual

Page 14

Advertising
background image

10

Actiontec DSL Gateway User Manual

11

Chapter 2 Performing a Basic Setup

6. Click Save and Restart in the “Save and Restart” screen.

7. The “Congratulations” screen appears. The Gateway is successfully configured.

The Power light flashes rapidly while the Gateway restarts, then glows steadily
green when fully operational. The Internet light will also glow steadily green. The
Gateway is now configured and users can start surfing the Web.
If an error stating the Web browser was unable to connect to the Internet appears,
check the configuration settings. Ensure all the information required by the

ISP

is

entered correctly.

Changing the User Name and Password

To create or change the user name and password controlling access to the
Gateway’s Web Configuration screens, follow these instructions:

1. From the Setup/Configuration screen, select Admin Username/Password

from the menu on the left side.

Advertising