Telnet timeout setting, Lan ip address – Actiontec electronic Wireless DSL Gateway GT704WG-QW04 User Manual
Page 48
44
Actiontec DSL Gateway User Manual
45
Chapter 4 Configuring Advanced Settings
Telnet Timeout Setting
Selecting Telnet Timeout Setting in the “Advanced Settings” screen generates
the “Telnet Timeout Setting” screen. In this screen, select the amount of idle time
before a telnet session is automatically terminated by activating the appropriate
radio button.
LAN IP Address
Selecting LAN IP Address in the “Advanced Settings” screen generates the “
LAN
IP
Address” screen.
The values in the “
LAN IP
Address” and “Netmask” text boxes are the
IP
address
and subnet mask address of the Gateway as seen on the network. These values can
be modified for your
LAN
network, but Actiontec recommends keeping the default
factory settings (
IP
address - 192.168.0.1; subnet mask - 255.255.255.0).
Note: If the Gateway’s
LAN IP
Address is modified, verify the
DHCP
Server range is within the same subnet. For more information,
see “
DHCP
Server Configuration.”
After changing settings, click Next or Back to continue, or Save and Restart to
make all changes permanent.