Actiontec electronic Wireless DSL Gateway GT704WG-QW04 - Manual (Page 25)

22
Actiontec DSL Gateway User Manual
13. The “Change Admin Username/Password” screen appears. Enter a new
user name (optional) in the “New Username” text box, then a password in
the “New Password” text box. Re-enter the password in the “Re-enter New
Password” text box. Make sure to write the user name and password down
and keep them in a secure location. They will be needed to access to the
Gateway’s Web Configurations screens in the future.
14. Click “Save and Restart” at the bottom of the screen.
15. The “Save and Restart” page appears. Click “Save and Restart” to save the set-
tings changed in the Change Admin Username/Password screen.
The Gateway has been configured to support a block of static IP addresses. Once
the Power light stops blinking, the Gateway is ready for use.