Actiontec electronic Wireless DSL Gateway GT704WG-QW04 User Manual
Page 8
4
Actiontec DSL Gateway User Manual
5
Chapter 1 Introduction
USB Light
The
USB
light illuminates when the Gateway is connected via its
USB
port.
Wireless Light
The Wireless light illuminates when the Gateway is activated for wireless use.
Rear Panel
The rear panel of the Gateway contains seven ports (Ethernet [4], Phone,
USB
, and
Power), as well as Reset and Power switches.
Phone Port
The Phone port is used to connect the Gateway to a
DSL
connection.
USB Port
The
USB
port is used to connect a computer to the Gateway via
USB
cable.
Ethernet Ports
The Ethernet ports are used to connect computers to the Gateway via Ethernet
cable. The Ethernet ports are
10/100
Mbps auto-sensing ports, and either a
straight-through or crossover Ethernet cable can be used when connecting to the
ports.