Actiontec electronic Wireless DSL Gateway GT704WG-QW04 - Manual (Page 21)

18
Actiontec DSL Gateway User Manual
19
Chapter 3 Setting Up Static IP
Configuring for a Block of Static IP Addresses
To set up the Gateway to use a block of static IP addresses:

Note: To complete this procedure, you must have access to the
Internet Service Provider ( ISP
) worksheet. If no worksheet has
been provided, contact the ISP .
1. Open the Web browser. In the address bar enter:
http://192.168.0.1
then press Enter on the keyboard.
2. The “Main Menu” screen appears. Select Setup/Configuration.
3. In the “Set Up/Configuration” screen, read the instructions, then select
Advanced Setup from the menu on the left side.