Actiontec electronic Wireless DSL Gateway GT704WG-QW04 - Manual (Page 68)

65
Static IP Address
on the Computer
To communicate with the Gateway from a computer on the network (to use
the Web Configuration Utility, for example), the user may have to switch the
IP
address settings from DHCP -enabled to static IP , so that the computer and the
Gateway are on the same subnet.
To set up static IP on a computer, select the operating system and follow the
instructions.

Note: The following procedures are based on the Gateway’s factory
default IP address. If the Gateway’s IP address has been changed,
enter the new IP address when instructed to enter an IP address.
Windows 98 SE
1. From the desktop, click on the Start button in the lower left corner.
2. From the menu that appears, select Settings.
3. Another menu appears. Select Control Panel.
B