Services blocking – Actiontec electronic Wireless DSL Gateway GT704WG-QW04 User Manual
Page 40
36
Actiontec DSL Gateway User Manual
37
Chapter 4 Configuring Advanced Settings
Services Blocking
Selecting Services Blocking in the “Advanced Settings” screen generates the
“Services Blocking” screen.
To modify Internet privileges (Web,
FTP
, Newsgroups, etc.) for the computers on
the network:
1. Enter the computer’s
IP
address in the
IP
Address: text box.
2. Select the Internet service(s) to be blocked.
3. Click Add to enter the computer’s IP address in the “Blocked
IP
Address List”
text box.
4. To remove blocked services, select the computer’s
IP
address in the “Blocked
IP
Address List” text box and click Remove.
Netmeeting
If a computer on the network uses Netmeeting, enable Netmeeting, by clicking the
circle next to “On” and entering the IP address of the computer. Click Next, then
click Save and Restart to apply the settings. If Netmeeting is not needed, click the
circle next to “Off.”
Note: Netmeeting is used for
NAT
/Private
IP
addressing only. If
the computer is configured for Unnumbered Mode and has a
public
IP
address, Netmeeting does not have to be enabled.