Actiontec electronic Wireless DSL Gateway GT704WG-QW04 - Manual (Page 70)

66
Actiontec DSL User Manual
67
Appendix b Static IP on the Computer
are installed” list box, locate and double-click TCP/IP .
6. The “ TCP/IP Properties” window appears. Select IP Address.
7. In the IP Address tab, make sure the circle next to “Specify an IP Address” is
selected. When active, a black dot appears in the circle. If the circle already
contains a black dot, leave it alone.
8. Enter the following numbers in the “ IP Address” text box:
192.168.0.2
Press the space bar on the keyboard to add the periods between the numbers.
9. Enter the following numbers in the “Subnet mask” text box: