Actiontec electronic Wireless DSL Gateway GT704WG-QW04 - Manual (Page 42)

38
Actiontec DSL Gateway User Manual
39
Chapter 4 Configuring Advanced Settings

Note: Before Remote Management can be activated, the admin-
istrator password must be set. To do this, go to the Setup screen
and select Change Admin Password. Follow the instructions in
the subsequent screens
To access the Gateway via Telnet, activate Remote Telnet by selecting On next to
“Remote Telnet.”
Port Forwarding
Selecting Port Forwarding in the “Advanced Settings” screen generates the “Port
Forwarding” screen. Port forwarding allows certain programs to bypass the
Gateway’s built-in firewall, allowing access to parts of the network (for hosting a
Web or ftp server, for example). To use port forwarding, enter the
IP port range
in the “ IP Port Range” text boxes. (If more than 10 ports are needed, Actiontec
recommends using DMZ Hosting. See “ DMZ Hosting” on the next page for more
information.) Choose the protocol type from the “Protocol” list box, then enter the
IP address of the computer on the network to be used as a host. Click Add. The
forwarded ports appear in the “List of Forwarded Ports” text box.
To remove forwarded ports, highlight them, then click Remove.