Actiontec electronic Wireless DSL Gateway GT704WG-QW04 - Manual (Page 45)

42
Actiontec DSL Gateway User Manual
43
Chapter 4 Configuring Advanced Settings
NAT (Network Address Translation)
Selecting NAT in the “Advanced Settings” screen generates the “ NAT ” screen. The
Gateway’s basic firewall security is based on NAT . Disabling NAT allows the com-
puters connected to the Gateway to be accessed by outside parties. Do not turn
NAT off unless instructed to do so by the ISP .
Static Routing
Selecting Static Routing in the “Advanced Settings” screen generates the “Static
Routing” screen. Enter the addresses in their respective text boxes, then click Add.
The address will appear in the “Static Routing Table.” To remove an address, high-
light it by clicking on it in the Static Routing Table, then click Remove.