Wan ip address – Actiontec electronic Wireless DSL Gateway GT704WG-QW04 User Manual
Page 27
24
Actiontec DSL Gateway User Manual
25
Chapter 4 Configuring Advanced Settings
4. In the next screen, read the recommendations. To perform an advanced setup
on the Gateway, click Begin Advanced Setup.
5. The “Configuring the Advanced Settings” screen appears. To check all the set-
tings, or if unsure of which settings to modify, select Next. To modify a spe-
cific configuration, click on its name in the menu on the left.
Note: To save changes made in any of the Advanced Settings
screens, click Save and Restart at the bottom of the menu on
the left side of the screen.
WAN IP Address
Selecting
WAN IP
Address in the “Advanced Settings” screen generates the “
WAN
IP
Address” screen.
WAN IP
Address allows manual set up of the IP address of
the Gateway. There are five ways to do this: Transparent Bridging, Obtain an
IP
Address through
PPP
o
E
, Obtain an
IP
Address Through
PPPoA
, Obtain an IP
Address through
DHCP
, and Specify a Static
IP
Address.