Actiontec electronic Wireless DSL Gateway GT704WG-QW04 - Manual (Page 33)

30
Actiontec DSL Gateway User Manual
31
Chapter 4 Configuring Advanced Settings
To activate the wireless “radio” of the Gateway, click in the circle next to “On.” To
turn it off, click in the circle next to “Off.”
ESSID
ESSID is the network name assigned to the wireless network. The factory default
setting is “ ACTIONTEC .” Although Actiontec recommends keeping the default value
intact, the ESSID value can be modified, using any combination of alphanumeric
characters (i.e., A-Z , a-z, 0-9 ). All wireless-capable computers included on the
Gateway’s wireless network must have this same ESSID value. (For the Actiontec
802.11 b Wireless PC Card, the ESSID value must be the same as the SSID value.)
Channel
Channel assigns the frequency band at which the Gateway communicates. In the
United States, use channels 1-11. (The default value is set to 9.)
Security
There are four wireless security options: Off, WEP, WEP+802.1x, and WPA. The
latter three options are different types of wireless security.
Off
Selecting Off disables wireless security. Selecting this option allows any computer
with wireless capability and the correct
ESSID value to join the wireless network.