Yokogawa EJA110A - Manual (Page 81)

IM 01C21B01-01E
REVISION RECORD
Title: Model EJA110A, EJA120A and EJA130A Differential Pressure Transmitter
Manual No.: IM 01C21B01-01E
Edition Date Page Revised Item
1st Jun. 1997 – New publication
2nd Mar. 1998 CONTENTS
1-1
5-3
6-1
11-1
11-3
11-7
2-9+
CMPL
Page 3
1
5.1.1
6.1
11.1
11.2
11.3
CMPL 1C21A1-02E 1st 2nd
Page 2
CMPL 1C21B1-01E 1st 2nd
Page 3
Page 4
CMPL 1C21B3-01E 1st 2nd
Page 3, 4
CMPL 1C21B4-01E 1st 2nd
Page 3, 4
• Add REVISION RECORD.
• Add ‘NOTE’ notice for F
OUNDATION Fieldbus and HART protcol
versions.
• Correct the mounting procedure for Direct-Mounting Type 3-
valve Manifold.
• Add Item to the Wiring Precautions.
• Add FOUNDATOIN Fieldbus protocol.
• Add Output signal code F and Wetted parts material code A
and D.
• Add Optional code A1.
• Change the figure of terminal configuration.
• Add Item 7-2.
• Add Part No. to Item 3, 4, 5, 6, 7, 8, 9, and 13.
• Add Wetted parts material code A and D.
• Add Optional code K5 and K6.
• Delete Optional code K5 and K6.
REVISION RECORD.EPS
3rd Sep. 1998 2-13
8-18
11-1
11-3
11-4
11-5
CMPL
2.10
8.3.2(11)
11.1
11.2
CMPL 1C21A1-02E 2nd 3rd
Page 2
CMPL 1C21B1-01E 2nd 3rd
Page 4
CMPL 1C21B4-01E 2nd 3rd
Page 3
• Delete EMC Conformity Standards Tables.
• Correction made in BURN OUT figure.
• Add Capsule code V.
• Add Capsule code V.
• Add Wetted parts material code M.
• Add Electrical connection code 7, 8, and 9.
• Add Electrical connection code 7, 8, and 9.
• Add Electrical connection code 7, 8, and 9.
• Add Part No. to Item 3 (For PG13.5 and M20).
• Add Part No. to Item 10 (For 1/2NPT, PG13.5, and M20).
• Add Capsule code V and Wetted parts material code M to
Table 1.
• Add Part No. to Item 13 (For Rc1/4 and Rc1/2).
• Add Part No. to Item 4, 5, 7, and 8 (For Rc1/4).
4th Oct. 1999 -
2-8
8-4
10-3
CMPL
Revised a book in a new format.
(The location of contents and the associated page numbers may
not coincide with the one in old editions.)
2.10
8.3.1
10.2
CMPL 1C21A1-02E 3rd 4th
CMPL 1C21B0-01E 1st
• Add AS/NZS 2064 1/2 to EMI, EMC Conformity Standards.
• Move Parameter Summary table to Chapter 8.
• Add Wetted parts material code B.
• Change a format.
• Combine CMPL 1C21B1-01E, 1C21B3-01E, and 1C21B4-01E.
2-8
8-5
9-5
10-2
10-3
10-4
10-5
10-6
10-7
2.9.4b
8.3.1
9.4.3
10.1
10.2
10.3
• Change contents of NOTE 1 and 4.
• Add footnote 2 and 3.
• Add table for tightning torque for cover flange bolts.
• Add calibration units of Pa and hPa.
• Add Bolts and nuts material code C.
• Add Bolts and nuts material code C.
• Add Bolts and nuts material code C and footnote 5.
• Add Amb. Temp. for T6: –40 to 75
°
C under /KF1.
• Add Optional code /F1, /N1, /N2, /N3, /N4, and /R1
Sep. 2000 5th