Yokogawa EJA118 - Manual (Page 75)

IM 1C22H1-01E
REVISION RECORD
Title: Model EJA118W, EJA118N, and EJA118Y Diaphragm Sealed Differential
Pressure Transmitter
Manual No.: IM 1C22H1-01E
Edition Date Page Revised Item
8th Mar. 1998 1-1
4-5
5-1
10-1
10-3
10-7
2-9+
CMPL
1
4.4
5.1
10.1.1
10.1.2
10.1.3
CMPL 1C22A1-02E 3rd 4th
Page 2
• Add FOUNDATION Fieldbus protcol version to ‘NOTE’ notice.
• Correct Teflon film Part Number.
F9347YD (Incorrect) F9347YA (Correct)
• Add Item 6 to the Wiring Precautions.
• Add FOUNDATOIN Fieldbus protocol.
• Add Output signal code F.
• Add Optional code A1.
• Change the figure of terminal configuration.
• Add Item 7-2.
REVISION RECORD.EPS
9th Sep. 1998 2-14
2-15
7-20
10-3
10-4
10-5
CMPL
2.10
2.10
7.3.2(11)
10.1.2
CMPL 1C22A1-02E 4th 5th
Page 2
CMPL 1C22H1-01E 1st 2nd
Page 4
• Delete EMC Conformity Standards Tables and move the section
to Page 2-14.
• Remove Page 2-15.
• Correction made in BURN OUT figure.
• Add Process flange size / material code F and C.
• Add Electrical connection code 7, 8, and 9.
• Add Process flange size / material code F and J.
• Add Electrical connection code 7, 8, and 9.
• Add Process flange size / material code R.
• Add Electrical connection code 7, 8, and 9.
• Add Part No. to Item 3 (For PG13.5 and M20).
• Add Part No. to Item 10 (For 1/2NPT, PG13.5, and M20).
• Add SUS316 Stainless Steel Part No. to Flange material in
Table 1.
• Part No. correction made in Table1.
(Incorrect) (Correct)
F9315KA F9351KA
F9315KB F9351KB
F9315GA F9351GA
F9315GB F9351GB
10th Feb. 2000 –
2-9
4-1
5-1
5-3
7-4
Changed to Electronic File Format.
Revised a book in a new format.
(The location of contents and the associated page numbers may
not coincide with the one in old editions.)
Major Revised Items:
2.9
2.10
4.2
5.2
5.4.2
7.3.1
1. Explosion class and option code of JIS flameproof approval.
Explosion class: Ex ds IIC T4(old) to Ex do IIC T4X(new).
Option code: /JF1(old) to /JF3(new)
2. Option code for flameproof packing adapter for JIS flameproof
approval.
Option code: /G1 and /G2(old) to /G11 and /G12(new)
3. Add “Pa” and “hPa” as the unit for calibration range.
4. Part number change for CPU Board Assembly.
• Add Figure 2.3 Example of using DCS.
• Add AS/NZS 2064 1/2 to EMI, EMC Conformity Standards.
• Correct the place of the high and low identification labels for
remote diaphragm seals.
• Add selection in the case of JIS flameproof type.
• Change option code for flame packing adapter.
Option code: G1 and G2
G11 and G12
Change Applicable cable O.D. and Identifying mark.
Part number: G9601AH G9601AM
Change the figure of flame proof packing adapter in Figure 5.4.2c.
• Add Pa and hPa to C20 and D31.