10 emc conformity standards, 11 ped (pressure equipment directive) – Yokogawa EJA530A User Manual

Page 18

Advertising
background image

IM 01C21F01-01E

2-10

2. HANDLING CAUTIONS

(4) Operation

WARNING

• OPEN CIRCUIT BEFORE REMOVING

COVER. INSTALL IN ACCORDANCE WITH
THIS USER’S MANUAL

• Take care not to generate mechanical sparking

when access to the instrument and peripheral
devices in hazardous locations.

(5) Maintenance and Repair

WARNING

The instrument modification or parts replacement
by other than authorized Representative of
Yokogawa Electric Corporation is prohibited and
will void the certification.

(6) Name Plate

᭹ Name plate

: Refer to USER'S MANUAL

᭹ Tag plate for flameproof type

᭹ Tag plate for intrinsically safe type

᭹ Tag plate for type n protection

᭹ Tag plate for flameproof, intrinsically safe type,
type n protection, and Dust

F0298.EPS

D

T65

ЊC (Tamb.: 40ЊC), T85ЊC (Tamb.: 60ЊC),

and T105

ЊC (Tamb.: 80ЊC)

MODEL: Specified model code.
STYLE: Style code.
SUFFIX: Specified suffix code.
SUPPLY: Supply voltage.
OUTPUT: Output signal.

MWP: Maximum working pressure.
CAL RNG: Specified calibration range.
DISP MODE: Specified display mode.
OUTPUT MODE: Specified output mode.
NO.: Serial number and year of production

*1

.

TOKYO 180-8750 JAPAN:

The manufacturer name and the
address

*2

.

*1: The third figure from the last shows the last one

figure of the year of production. For example, the
production year of the product engraved in “NO.”
column on the name plate as follows is 2001.

The year 2001

12A819857 132

*2: “180-8750” is a zip code which represents the

following address.

2-9-32 Nakacho, Musashino-shi, Tokyo Japan

2.10 EMC Conformity Standards

EN61326-1 Class A, Table 2 (For use in industrial
locations)

EN61326-2-3

CAUTION

This instrument is a Class A product, and it is
designed for use in the industrial environment.
Please use this instrument in the industrial
environment only.

NOTE

YOKOGAWA recommends customer to apply
the Metal Conduit Wiring or to use the twisted
pair Shield Cable for signal wiring to conform the
requirement of EMC Regulation, when customer
installs the EJA Series Transmitters to the plant.

2.11 PED (Pressure Equipment

Directive)

(1) General

• EJA series of pressure transmitters are categorized

as pressure accessories under the vessel section of
this directive 97/23/EC, which corresponds to
Article 3, Paragraph 3 of PED, denoted as Sound
Engineering Practice (SEP).

Advertising