Yokogawa EJA530A - Manual (Page 66)

IM 01C21F01-01E
REVISION RECORD
Title: Model EJA510A and EJA530A Absolute Pressure and Gauge Pressure
Transmitter
Manual No.: IM 01C21F01-01E
Edition Date Page Revised Item
1st June 1999 – New publication
2nd June 2000 CONTENTS
2-8
8-4
8-5
10-4
10-5
CMPL
Page 3
2.9.4 b.
8.3.1
10.3
CMPL 1C21F1-01E 1st 2nd
Page 2
• Add REVISION RECORD.
• Add maximum process temperature of –40 to 75°C for KEMA
Flameproof type T6.
• Change wating period when opening terminal cover after power
off from 1 min. to 10 min.
• Add note for using heat-resisting cables.
• Add footnote
*2 for amp. damping time constant when Optional
code /F1 is specified.
• Add footnote
*3 for low side output status at failure alarm when
Optional code /F1 is specified.
• Change explosion protected type Optional code from /
ᮀᮀ1 to
/ ᮀᮀ11.
• Add maximum process temperature of –40 to 75°C for KEMA
Flameproof type T6.
• Add Optional code /F1 and /N4.
• Change Part No. on Item 7, CPU Assembly.
F9342BP F9342AB
F9342BQ F9342AL
• Add Part No. on Item 7, CPU Assembly.
F9342AF for BRAIN protocol, Optional code /F1
F9342AM for HART protocol, Optional code /F1
REVISION RECORD.EPS
3rd Aug. 2001 –
2-8
8-4, 8-5
10-1
10-4
10-6
CMPL
2.10
8.3.1
10.1
10.3
10.4
CMPL 1C21F1-01E 2nd CMPL 01C21F01-01E 3rd
• Style change from S1 to S2.
• Change EMC Conformity number.
• Add footnote (*4) to B40, Maximum static pressure in Parameter
Summary.
• Change Maximum Over pressure for Capsule code A from
400 kPa to 4 MPa.
• Change explosion protected type Optional code from /
ᮀᮀ11 to
/ ᮀᮀ1.
• Change dimensions.
• Change Part No. on Item 15, Capsule Assembly and followings.
• Item 17; F9374MS
F9385XK, F9385XM
• Item 18; F9374MU F9385XL
• Item 19; F9374NZ F9385XZ
• Item 20; F9374MX F9385XV, F9374NX F9385XT,
F9374MW F9385XU
• Item 23; F9374MY F9385XW
• Item 24; F9374NY F9385XY
4th May 2002 1-2
2-7
10-4
10-5
1.1
2.9.4
10.3 • Add “1.1 For Safety Using.”
• Add descriptions based on ATEX directive.
• Add Optional code K
ᮀ2.
• Add Optional code C2 and C3.
5th Apr. 2003 2-8
2-10
10-3
10-4
10-5
CMPL
2.9.4
2.11
10.2
10.3
10.3
CMPL 01C21F01-01E 3rd 4th • Add Option code KU2
• Add PED (Pressure Equipment Directive)
• Add Output Signal code F.
• Add Option code KU2.
• Add Option code HAC and PE3.
• Add part No. on Item 7-2, CPU Assembly for fieldbus protocol.