Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 398)

386 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
8
FIGURE 4 Provisioning Policy - Adoption screen
Within the Controller Group field, use the Preferred Group item to set an optimal group for the
Access Point’s adoption. The name of the preferred group cannot exceed 64 characters.
Select the check box to define a VLAN the Access Point’s associating controller or service platform
is reachable on. VLANs 0 and 4,094 are reserved and cannot be used by a controller or service
platform VLAN.
Set the following Controller Hello Interval parameters:
10. Enter Controller Hostnames as needed to define resources for Access Point adoption.
Hello Interval Define an interval (from 1 - 120 seconds) between hello keep alive messages exchanged with the
adopting device. These messages serve as a connection validation mechanism to ensure the
availability of the adopting resource.
Adjacency Hold Time Set the time (from 2 - 600 seconds) after the last hello packet after which the connection between
the controller and Access Point is defined as lost and their connection is re-established.