Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 957)

Brocade Mobility RFS Controller System Reference Guide 945
53-1003099-01
15
1. Select the Statistics menu from the Web UI.
2. Select System from the navigation pane (on the left-hand side of the screen). Expand the a RF
Domain, select a controller or service platform, and select one of its connected Access Points.
3. Select DHCP and expand the menu to reveal its sub menu items.
4. Select Networks.
The DHCP Networks screen displays the following:
FIGURE 142 Access Point - DHCP Network screen
Firewall
Access Point Statistics
A firewall is a part of a computer system or network designed to block unauthorized access while
permitting authorized communications. It’s a device or set of devices configured to permit or deny
access to the controller or service platform managed network based on a defined set of rules.
Name Displays the name of the DHCP pool.
Subnet Address Displays the subnet addresses of the DHCP Pool.
Used Addresses Number of addresses that have already been leased to requesting clients.
Total Addresses Total available addresses that can be leased to requesting clients.
Refresh Select Refresh to update the statistics counters to their latest values.