Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 533)

Brocade Mobility RFS Controller System Reference Guide 521
53-1003099-01
8
The Retain Image feature is enabled for all controller and service platform RF domain
managers with the flash memory capacity to store firmware images for the selected
Access Point models they provision. This feature is disabled for Access Point RF domain
managers that do not typically have the flash memory capacity needed.
19. Select OK to save the changes made to the profile maintenance Heartbeat tab. Select Reset to
revert to the last saved configuration.
Profile Management Configuration and Deployment Considerations
Profile Management Configuration
Before defining a profile’s management configuration, refer to the following deployment guidelines
to ensure the profile configuration is optimally effective:
• Define profile management access configurations providing both encryption and
authentication. Management services like HTTPS, SSH and SNMPv3 should be used when
possible, as they provide data privacy and authentication.
• Brocade recommends SNMPv3 be used for management profile configurations, as it provides
both encryption and authentication.
Mesh Point Profile Configuration
Mesh points are Brocade Access Points dedicated to mesh network support. Mesh networking
enables users to access broadband applications anywhere (including moving vehicles).
To review a profile’s mesh point configuration:
1. Select the Configuration tab from the Web UI.
2. Select Profiles from the Configuration tab.
3. Select Manage Profiles from the Configuration > Profiles menu.
4. Select Mesh Point.