Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 954)

942 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
15
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF
Domain, select a controller or service platform, and select one of its connected Access Points.
3. Select DHCP and expand the menu to reveal its sub menu items.
4. Select General.
FIGURE 140 Access Point - DHCP Server General screen
The Status table defines the following:
Interfaces Displays the Access Point interface used with the DHCP resource for IP address provisioning.
State Displays the current operational state of the DHCP server to assess its availability as a viable IP
provisioning resource.