Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 723)

Brocade Mobility RFS Controller System Reference Guide 711
53-1003099-01
14
2. Use the Captive Portal List drop-down menu to select an existing captive portal configuration to
upload to an Access Point and display to requesting client devices as they login and adhere to
the terms required for captive portal access.
NOTE
If selecting the Captive Portal Pages screen from the RF Domain level of the UI’s hierarchal tree,
there’s an additional Upload from Controller option to the right of the Captive Portal List drop-down
menu. Select this option to upload captive portal page support from this device’s managing
controller.
Use the Scheduled Upload Time item to set the time of the captive portal page upload. Select Now
to immediately start. Use the date, hour and minute spinner controls to set a future date and time
for the upload.
The All Devices table lists the hostname and MAC address of all devices adopted by this
Access Point.
Use the arrow buttons (>> > << <) to move selected devices from the All Devices table to the
Upload List table. The Upload List table displays the Access Points to which the captive portal
pages are applied.
Select Upload from the lower right-hand side of the screen to upload the captive portal pages to the
designated Access Points.
Select the CP Pages Image File tab.
FIGURE 11 Captive Portal Pages - CP Page Image File screen
Use the Captive Portal List drop-down menu to select an existing policy. This policy contains the
image (or set of login and conditions pages) requesting clients will navigate and complete before
granted access to the network using the unique permissions of the captive portal.