Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 715)

Brocade Mobility RFS Controller System Reference Guide 703
53-1003099-01
14
12. Selecting Advanced lists additional options for the device’s firmware image file location:
13. Select the Load Image button to upload the device firmware in preparation of an upgrade.
The firmware image is loaded to the flash/upgrade directory (not the flash/cache
directory). If the NOC pushes the image, then it is loaded to flash/cache/upgrade.
14. Select Upgrade Status to assess the administration, scheduling and progress of device
firmware updates.
FIGURE 5 Upgrade Status screen
Protocol Select the protocol for device firmware file management and transfer. Available options include:
•
tftp
•
ftp
•
sftp
•
http
•
cf
Port Designate the port for transferring the firmware files used in the upgrade operation. Enter the port
number directly or use the spinner control.
Host Specify a numerical IP address or textual Hostname of the resource used to transfer files to the
devices designated for a firmware update.
Path / File Define the path to the file on the file repository resource. Enter the complete relative path to the
file.