Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 545)

Brocade Mobility RFS Controller System Reference Guide 533
53-1003099-01
8
FIGURE 99 Advanced Profile - Client Load Balancing screen
Select the SBC strategy from the drop-down menu to determine how band steering is conducted.
Band steering directs 5 GHz-capable clients to that band. When an Access Point hears a
request from a client to associate on both the 2.4 GHz and 5 GHz bands, it knows the
client is capable of operation in 5 GHz. Band steering steers the client by responding only
to the 5 GHz association request and not the 2.4 GHz request. The client only associates
in the 5 GHz band.
Set the following Neighbor Selection Strategies:
Using Probes from
common clients Select this option to select neighbors (peer devices) using probes from common clients. This setting
is enabled by default.
Using Notifications from
roamed clients Select this option to select neighbors (peer devices) using roam notifications from roamed clients.
This setting is enabled by default.
Using smart-rf neighbor
detection Select this option to select neighbors (peer devices) using Smart RF. This setting is enabled by
default.