HT instruments MACROTEST 5035 - Manual (Page 55)

MACROTEST 5035
EN - 54
If the instrument measures an
interfering voltage higher than 30V
on the amperometric circuit, it
doesn’t perform the test and a screen
similar to the one beside appears.
o
31
V
VOL AG
THE PREVIOUS RESULT CANNOT BE SAVED.
If the resistance measured is higher
than the full scale of the instrument,
when pressing
START/STOP the
instrument performs the test and a
screen similar to the one beside
appears.
o
>1999
Ω
- - - - - -
If the resistivity measurement is higher
than the following value
1999x6.28x(distance between the rods
selected), when pressing
START/STOP the instrument performs
the test and a screen similar to the one
beside appears.
o> 1999
Ω
- - - - - -
SAVING:
The tests can be stored pressing the
SAVE key twice
(according to paragraph 5.1).
Voltage value on the amperometric circuit
SAVE
1999 Ω is the full
scale of the
instrument.
1999 Ω is the full
scale of the
instrument.
SAVE