HT instruments MACROTEST 5035 - Manual (Page 60)

MACROTEST 5035
EN - 59
7. INSTRUMENT CONNECTION TO A PC
The connection between PC and instrument is realized through the serial port and optical
serial cable, provided with the software package.
Before effecting the connection it is necessary to select the COM port used for the
transmission. To set this parameter start the software and look up the help on line.
ATTENTION: The selected port shall NOT be shared by other devices or applications
(example mouse, modem, etc.)..
To transfer the stored data from the instrument to the PC keep to the following procedure:
1. Turn the
switch on position RS232.
2. The
item
"Ser" appear at display as shown in herewith picture.
Then proceed according to the software instruction manual to transfer the
measurements effected.
The communication between
instrument and PC occurs. se
Note: The right download speed is: 9600 baud (see software instruction manual).