KROHNE BM 100A Handbook User Manual
Page 12
Advertising
12
Handbook BM 100 A
1.3.3 Installation
instructions: Gauge - all applications
BM100 A gauges are designed to be mounted on a suitable process connection on a tank or sump.
Install the gauge using two people to avoid damaging the probe. Support the housing and the probe.
Installation of single and twin cable probe level meters
Caution :
1
Do not over-bend
probe!
Inserting the probe:
2
hold more than one
metre above the
opening to avoid cable
bending.
Outdoor sites
Fit a sunshade on the gauge for open-air installations: this is supplied on demand. The ambient
temperature limits of the gauge are given below.
Advertising