KROHNE BM 100A Handbook - Manual (Page 48)

48 Handbook BM 100 A
Replacing the fuses
As indicated in the diagram below, the power supply is protected by a fuse, F1. This will be visible
when the electronics chassis is removed from the housing. The fuse rating is dependant on the type
of power supply used and is given below :
Power Supply Board 100 / 240 V AC
Power supply fuse F1
T 400 mA / 1500 A (250V)
IEC127-2/V Time Lag Fuse
Power Supply Board 24 V DC / AC
Power supply fuse F1
T 1.25 A / 1500 A (250V)
IEC127-2/V Time Lag Fuse