SHIMPO DT-365 - Manual (Page 21)

21
Saving on internal oscillation emission 4.5.1.1
Press and hold the “LOAD(SAVE)” key in the Internal oscillation emission mode to save the setting
value.
Press and hold the LOAD(SAVE) key to enter the save standby status. SAVE and the memory
number in which the setting value is saved are indicated alternately. In this status, a memory
number in which the setting value is saved can be changed using the dial operation.
Operate the dial to end alternate lighting. Only a memory number in which the setting value is
saved is indicated.
To save, press the “LOAD(SAVE)” key. The setting value is saved in the specified memory number
and the display returns to the emission screen.
To cancel saving, press the x2 key. The save standby status ends and the display returns to the
emission screen.
Operation Display
Press and hold
Indicates
alternately
Press and hold
Go to the screen to
save the setting value
Select the memory
number
Cancel
Confirm saving
Save the setting value
Save standby status
Operate the dial to specify the save destination
Cancel saving
CCW CW