SHIMPO DT-365 - Manual (Page 24)

24
Reading out on external synchronous emission 4.5.2.2
Press the “LOAD(SAVE)” key in the external synchronous emission mode to read out the setting
value.
Each press of the “LOAD(SAVE)” key changes the memory number to call.
The memory number being read is indicated on the memory number display.
Operation Display
Each press of this
key
No memory number
(Free mode)
Memory number 1
Memory number 2
Memory number 5
* After reading out the setting value, when any of the setting values for the emission count (FPM),
emission angle (DUR), and/or delay time (PHA) are changed, the called memory number display goes
off, then it goes to free mode.