SHIMPO DT-365 - Manual (Page 7)

7
Part names and functions 3
Main unit 3.1
Super luminosity LED (18 lights)
Power switch
External I/O connector
Operation
section
* The image is for DT-365.
Operation section 3.2
②
①
③
④
⑧
⑥
⑦
⑤
* The image is for DT-365.
No. Name Function description
① Power switch Turns the power ON/OFF.
②
Dial Used to change the emission frequency or emission duration.
③ MODE key
Each press of this key switches the number display in the following order: Emission
frequency (FPM), Emission duration, Emission delay duration (PHA), Emission
frequency (FPM)...
④
LOAD (SAVE) key
Reads the saved setting value.
Also, saves the current setting value by pressing and holding it.
⑤
SIG key Switches the internal oscillation emission and external synchronous emission.
⑥ UNIT key
Switches to indicate the emission time when the emission duration is indicated. When
the delay duration is indicated, each press of this key switches indication of the delay
time and angle.
⑦ x2 key
Each press of this key during on internal oscillation emission alters allows the
performance of emission by double the current set emission count (frequency).
⑧ ÷2 key
Each press of this key during on internal operation mode drops the current emission by
half the count (frequency).