SHIMPO DT-365 - Manual (Page 27)

27
Trigger edge setting (Function mode 2) 4.6.3
In the external trigger mode in which the edge of the external pulse triggers emission, the rising
edge or falling edge can be set.
When the trigger edge is set to L-H
External pulse
(Pulse entered from an
external device to DT-361/365)
Strobe emission
* Delay time (time based on the delay angle setting value)
※ ※ ※
When the trigger edge is set to H-L
Strobe emission
* Delay time (time based on the delay angle setting value)
※ ※ ※
External pulse
(Pulse entered from an
external device to DT-361/365)
* With a NPN open collector connected, emission is performed at the rising edge when the trigger edge
setting is L-H and at the falling edge when H-L.