SHIMPO DT-365 - Manual (Page 29)

29
Auto emission stop time setting (Function mode 3) 4.6.4
This setting is used to stop the emission automatically when no operation is performed for a certain
period of time.
The available setting time is within the range between 0 min and 120 min, which can be changed
by 1 minute.
When it is set to 0, the auto emission stop function is turned OFF and emission is performed
continuously.
When emission is stopped by the auto emission stop function, use the key or dial operations to
restart emission.
Operation Display
Change the setting
value
Indicates alternately
* Previous setting value
CCW CW
Go to function mode
4
Go to function mode 4
Display when emission is stopped by the auto emission stop function
Restart emission
Key or
dial operations