SHIMPO DT-365 - Manual (Page 8)

8
Display 3.3
Part names 3.3.1
Numerical display
Unit display
Mode display
Emission setting
display
Memory number display
Charging lamp (only for DT-365)
Number display 3.3.2
•Indicates the setting value of the emission count (frequency) in internal oscillation emission mode.
•Indicates the external signal frequency in external synchronous emission mode.
•Each setting value is indicated in the function setting mode.
* For details about the function setting mode, refer to 4.6 Function mode.
Unit display 3.3.3
Indicates the unit of the value on the number display.
Emission duration (angle)
Delay duration (phase)
Emission duration (time) Delay time
Emission setting display 3.3.4
Indicates the emission setting.
Internal oscillation emission External synchronous emission
Mode display 3.3.5
Indicates the mode on the number display.
Emission count mode Emission duration mode Phase mode
Memory number display 3.3.6
Indicates the memory number on the number display.
When all the numbers go off the memory number 0 (free mode) is assigned and the previous
setting value is indicated.
Charging lamp (only for DT-365) 3.3.7
Lights up while charging and goes off when charging is complete.