Thermo Fisher Scientific CyberScan PC 510 - Manual (Page 31)

Instruction Manual PC 510
27
8.4 P3.0: pH Measurement configuration
This sub-group program allows customising the meter to your specific needs. You can program the
meter to:
1. Select READY indicator ON or OFF.
2. Select the number of pH calibration points.
3. Select between USA and NIST buffers.
4. Select between
°C and °F units for temperature readings.
Figure 26 on the right shows the setup sequence for this program sub-
group.
Figure 27: P3.0 - Unit
configuration program
SETUP
cof
p 3.0
pH
SETUP
READY
ON
p 3.1
ENTER
RANGE
READY
ON
SETUP
3 p
p 3.2
ENTER
RANGE
SETUP
C
p 3.4 °C
ENTER
RANGE
SETUP
usa
p 3.3
ENTER
RANGE