P 3.4 – Thermo Fisher Scientific CyberScan PC 510 User Manual
Page 34
Instruction Manual PC 510
30
8.4.4 P3.4
Selecting
°
C or
°
F
This meter lets you select between
°C and °F units for temperature readings.
From measurement mode
1. Press the MODE key to select pH measurement mode.
2. Press SETUP key to enter Setup MODE.
3. Press
the
or key to scroll through sub-groups until you view
parameter P3.0.
4. Press the ENTER key four times to select parameter P3.4.
5. Press
the
or key to toggle between
°C and °F.
6. Press the ENTER key to confirm selection and to return to the sub-
group menu. Press the CAL/MEAS key to return to measurement
mode.
NOTE: You can switch between
°
C and
°
F in Program P7.2 (available
from conductivity or TDS mode). If you switch between
°
C and
°
F in pH
mode, the meter will also switch in conductivity or TDS mode.
Figure 31: P3.4- Select
temperature units
SETUP
C
p 3.4
°C
SETUP
F
p 3.4
°F
ENTER
RANGE