West Control Solutions KS 94 - Manual (Page 28)

10.7.5 Signal output 5 / OUT5
Used for configuring the source of output OUT1.. This signal output can be configured for extensive
functions.
Main configuration:
Src Type Mode
(Signal source) (Output stage) (Actuator output action)
00: output switched off
01: controller output Y1/Yout1
02: controller output Y2/Yout2
25: alarm 1 (limit1)
26: alarm 2 (limit2)
27: alarm 3 (limit3)
28: alarm 4 (limit4)
29: programmer output 1
30: programmer output 2
31: programmer output 3
32: programmer output 4
33: program end
0: relay (switching) 0: not selectable
1: direct / normally open
2: i nverse / normally closed
10.7.6 DO5,6 (digital control outputs)
Additional digital control outputs are configured!
Main configuration:
(digital control signal DO5)
Selection is possible with option C fitted.
Src Mode
(Digital control signal DO5) (Actuator output action)
00: output switched off
01: controller output Y1
34: status automatic=0 / manual=1
0: not selectable
1: direct / normally open
2: inverse / normally closed
Main configuration:
(Digital control signal DO6)
Selection is possible with option C fitted.
Src Mode
(Digital control signal DO6)
(Motor actuator output
action)
00: output switched off
02: controller output Y2
35: status external=0 / internal=1
0: not selectable
1: direct / normally open
2: inverse / normally closed
Configuration
Operating instruction KS94 30