Optichill ™ chillers, General description – Airedale OptiChill FreeCool 500kW - 1365kW User Manual

Page 14

Advertising
background image

OPTICHILL

Chillers

14

Chillers

Technical Manual : 6530166 F 03/2012

General Description

OPTIONAL EXTRAS

Anti Vibration Mounts

(Spring Type)

Spring vibration isolators can be supplied loose for on site fitting to the base frame of
each unit.

The isolators are suitable for fitting to structural steelwork providing the surface is level
and of sufficient strength where a high level of vibration elimination is required.

Anti Vibration Mounts

(Pad Type)

Pad vibration isolators can be supplied loose for on site fitting to the base frame of
each unit.

The isolators are suitable for fitting to structural steelwork providing the surface is level
and of sufficient strength where a moderate degree of vibration elimination is required.

Discharge Air Plenum -
Condenser Fan

Constructed from galvanised sheet steel coated with epoxy baked powder paint, this
plenum directs discharge air vertically, thus limiting a degree of air re-circulation and
provides a degree of acoustic reduction in the horizontal plane; factory fitted. For details
please contact Airedale.

Standard unit colour is Light Grey (RAL 7035).

For dimensional details refer to

Dimensional Data

, on page 58.

Extended Discharge Air
Plenum - Condenser Fan

Constructed from galvanised sheet steel coated with epoxy baked powder paint, this
plenum directs discharge air vertically, thus limiting greatly air re-circulation and provides
a degree of acoustic reduction in the horizontal plane; factory fitted. For details please
contact Airedale.

Standard unit colour is Light Grey (RAL 7035).

For dimensional details refer to

Dimensional Data

, on page 58.

R134a Leak Detection
System

A factory calibrated and fitted leak detection system, will raise an alarm when refrigerant
gas is detected.

Fitted within the unit compressor enclosure.

Closed Transition
Star/Delta Compressor
Start

Closed transition Star/Delta starting can be incorporated to avoid high transient
changeover current peaks when the compressor motor is switched over from Star to
Delta. Refer to

Design Features & Information

, on page 20.

Advertising
This manual is related to the following products: