Airedale OptiChill FreeCool 500kW - 1365kW - Manual (Page 26)

OPTICHILL
™
Chillers
26
Chillers
Technical Manual : 6530166 V1.6.0 02_2013
Controls
OPTIONAL FEATURES
Pump(s) Hours Run Displays hours run of each pump.
BMS Interface Card Enables Controlled units to be interfaced with most BMS, factory fitted,
please contact Airedale.
A wide range of protocols can be accommodated through the use of interface devices.
Available as a standard option are: ModBus/Jbus, Carel and Trend.
For interfaces such as SNMP, LonWorks, Metasys and BACnet, please contact Airedale.
Also available is Airedale’s own supervisory plug-in BMS card pCOWeb.
Based on Ethernet TCP/IP secure technology with SNMP features.
Requires no proprietary cabling or monitoring software and supplied pre programmed with
an IP address for ease of set up.
BMS system configuration by others.
GSM Modem Kit Allows remote alarm monitoring by sending alarm text messages to a nominated mobile
phone, factory set.
Chiller Sequence
Manager For the efficient temperature and capacity operation of multiple units on a single site (up
to 8 units), the sequence manager will permit interlinked operation of the complete system
thereby providing optimum temperature control and minimum power consumption.
Included within this package is a site visit by Airedale Control Specialists to set up
multiple unit sequence control.
The chiller sequence manager is supplied as a separate control panel to be mounted
remotely indoors, such as a plant room.
CAUTION When adding to an existing controls scheme, please consult Airedale to ensure
strategy compatibility.