Milestone M50 - Manual (Page 116)

Milestone Husky M30/M50 Administrator's Manual
www.milestonesys.com 116 Advanced configuration
8. Go to XProtect Smart Client. If the yellow event indicator lights up for the required camera,
your generic event works as intended.:
General event properties
Ports and polling
The General Event Properties window lets you specify network settings to be used in connection with
event handling.
Name Description
Alert and generic event port
Specify port number to use for handling events. Default port is port
1234.
SMTP event port
Specify port number to use for sending event information from
hardware devices to Milestone Husky product via SMTP. Default
port is port 25.
FTP event port
Port to use for FTP communication with the hardware device.
Default port is port 21.
Polling interval [1/10] second
For a small number of hardware devices, primarily dedicated
input/output devices (see "About dedicated input/output devices" on
page 58), it is necessary for Milestone Husky product to regularly
check the state of the hardware devices' input ports in order to
detect input. Such state checking at regular intervals is called
polling. You can specify (in tenths of a second) the interval between
state checks. Default value is 10 tenths of a second (that is one
second). For dedicated input/output devices, it is highly
recommended that the polling frequency is set to the lowest
possible value (one tenth of a second between state checks). For
information about which hardware devices require polling, see the
release note.