Milestone M50 - Manual (Page 135)

Milestone Husky M30/M50 Administrator's Manual
www.milestonesys.com 135 Advanced configuration
Camera-specific scheduling properties
Online period
When you configure scheduling (see "Configure camera-specific schedules" on page 66) for specific
cameras, your Online Period settings are probably the most important, since they determine when
each camera should transfer video to Milestone Husky product.
By default, cameras added to Milestone Husky product are automatically online, and you only need to
modify the online period settings if you require cameras to be online only at specific times or events.
Note, however, that this default may be changed as part of the general scheduling options (see
"Scheduling options" on page 133), in which case cameras added at a later time are not automatically
online.
The fact that a camera transfers video to Milestone Husky product does not necessarily mean that
video from the camera is recorded. Recording is configured separately, see Configure video and
recording (see "About video and recording configuration" on page 64).
Name Description
Online
Select the required profile (for example Always on) for the online
schedule (see "Configure camera-specific schedules" on page 66)
for the relevant camera(s).
You specify a camera's online periods by creating schedule profiles
based on:

Periods of time (example: Mondays from 08.30 until 17.45),
shown in pink:

Events within periods of time (example: from Event A occurs
until Event B occurs Mondays from 08.30 until 17.45),
shown in yellow:
The two options can be combined , but they cannot
overlap in time.
Speedup
Speedup may also take place based on events, but that is configured elsewhere. See Frame rate -
MJPEG (General recording and storage properties) (see "Frame rate - MJPEG" on page 79) and
Video (Camera-specific properties) (see "Video" on page 86).
Name Description
Speedup
For specific MJPEG cameras, specify speedup periods. Before you
can define this type of schedule, you must enable (see "Frame rate
- MJPEG" on page 79) speedup. You specify a camera's speedup
periods by creating schedule profiles based on periods of time
(example: Mondays from 08.30 until 17.45), shown in olive green: