Milestone M50 - Manual (Page 121)

Milestone Husky M30/M50 Administrator's Manual
www.milestonesys.com 121 Advanced configuration
Name Description
Send e-mail if this event
occurs
Only available if e-mail notification (see "Configure email
notifications" on page 144) is enabled. Select if Milestone Husky
product should automatically send an e-mail when the event occurs.
Recipients are defined as part of the e-mail notification
configuration. When using e-mail notifications, also bear in mind
individual cameras' scheduling.
Attach image from camera
Only available if e-mail notification (see "Configure email
notifications" on page 144) is enabled. Select to include an image,
recorded at the time the event is triggered, in the e-mail notification,
then select the relevant camera in the list next to the check box.
Delete Delete a selected event.
Add
Add a new event. When Global or a specific camera is selected,
clicking Add adds a new manual event. When a specific manual
event is selected, clicking Add adds a timer event (see "Add a timer
event" on page 113) to the selected manual event.
Send SMS if this event occurs
Only available if SMS notification (see "Configure SMS
notifications" on page 147) is enabled. Select if Milestone Husky
product should automatically send an SMS when the event occurs.
Recipients are defined as part of the SMS notification configuration.
When using SMS notifications, also note the individual cameras'
scheduling.
Timer event
When you add timer events (see "Add a timer event" on page 113), specify the following properties:
Name Description
Timer event name
Specify a name. Names must be unique, and must not contain any
of these special characters: < > & ' " \ / : * ? | [ ]
Some cameras only support event names of a certain length and/or
with a certain structure. Refer to the camera's documentation for
exact details.
Timer event occurs after
Specify the amount of time that should pass between the main
event occurring and the timer event (in seconds or minutes).
Generic event
When you add generic events (see "Test a generic event" on page 114), specify the following
properties: