Milestone M50 - Manual (Page 150)

Milestone Husky M30/M50 Administrator's Manual
www.milestonesys.com 150 Advanced configuration
Central
About Central
Central Settings lets you specify the login settings required for an XProtect Central server to access
the surveillance system in order to retrieve status information and alarms. If you are a user of the
Milestone Integration Platform, this is also the dialog that lets you specify the login settings for the
Milestone Integration Platform to access the surveillance system.
Enable XProtect Central
1. In the Management Application's Navigation pane, expand Advanced Configuration, right-
click Central and then select Properties.
2. Enable the use of Central connections by selecting the Enable Milestone XProtect Central
check box.
3. Specify required properties (see "Central properties" on page 150).
4. Save your configuration changes by clicking Save in the yellow notification bar in the upper-
right corner of the Management Application.
Central properties
Name Description
Enable Milestone XProtect
Central connections Enables the use of Central connections, allowing you to specify
further properties.
Login Name
Type the name used for the connection between the Milestone
Husky product and Central servers or the Milestone Integration
Platform. The name must match the name specified on the Central
server or in the Milestone Integration Platform.
Password
Type the password used for the connection between Milestone
Husky product and Central servers or the Milestone Integration
Platform. The password must match the password specified on the
Central server or in the Milestone Integration Platform.
Port
Type the port number to which the XProtect Central server or the
Milestone Integration Platform should connect when accessing the
Milestone Husky product server. The port number must match the
port number specified on the XProtect Central server or in the
Milestone Integration Platform. Default port is 1237.