Milestone M50 - Manual (Page 157)

Milestone Husky M30/M50 Administrator's Manual
www.milestonesys.com 157 Advanced configuration
Action details
Configure the parameters for an action:
Display access request notification:
o Specify which cameras, microphones or speakers the
XProtect Smart Client user connects to via the
notification user interface when a given event occurs.
Also specify the sound to alert the user when the
notification pops up. To enable more commands in the
notification, see Add Command.
Go to PTZ preset:
o Specify the camera and select from the pre-configured
presets a pattern for the camera and the time of return
to preset when a given event occurs.
Start recording:
o Specify the cameras that should start recording and the
duration when a given event occurs.
System action:
o Specify an action predefined in the XProtect system.
Add command
Select which commands that should be available as buttons in the
access request notifications in the XProtect Smart Client.
Related access request commands:
o Enables all commands related to access request
operations available on the source unit. For example
Open door.
All related commands:
o Enables all commands on the source unit.
Access control command:
o Enables a selected access control command.
System command:
o Enables a command predefined in the XProtect system.
Cardholders
If your access control system does not include pictures of the cardholders, you can add and delete
pictures in the XProtect system.
If your access control system does not support adding/deleting pictures in the XProtect system, you
can use the Cardholder pane to review information retrieved from the access control system.