Milestone M50 - Manual (Page 171)

Milestone Husky M30/M50 Administrator's Manual
www.milestonesys.com 171 Advanced configuration
1. In the Management Application's Navigation pane, expand Advanced Configuration and
select Services. This displays the status of each service.
2. You can now stop each service by clicking the Stop button. When a service is stopped, the
button changes to Start, allowing you to start the service again when required.
Tip: Occasionally, you may want to stop a service and start it again immediately after. The
Restart button allows you to do just that with a single click.
Servers
Mobile server
About Mobile server
A Mobile server handles log-ins to the system from Milestone Mobile client (see "About Milestone
Mobile client" on page 13) from a mobile device or XProtect Web Client (see "About XProtect Web
Client" on page 15).
Upon correct login, the Mobile server distributes video streams from relevant recording servers to
Milestone Mobile client. This offers an extremely secure setup, where recording servers are never
connected to the Internet. When a Mobile server receives video streams from recording servers, it also
handles the complex conversion of codecs and formats allowing streaming of video on the mobile
device.
Important: Before you begin the installation of the Mobile server, make sure you are logged in with an
account that has administrator rights. Installation cannot be successful if you use a standard user
account.
About Video push
Video push is feature in your Milestone Mobile client that allows you to use your mobile device's
camera to, for example, collect evidence when you investigate an alarm or event. You do this by
sending a video stream from your mobile device to your system. In the Mobile server settings, you can
set up how many users should be able to use the Video push feature in the system.
Add/edit a Mobile server

Go to Servers > Mobile Servers. From the menu that appears, select Create New. Fill in/edit
the needed properties.
IMPORTANT: If you edit settings for Login method, All cameras view and Outputs and events,
while you are connected to the Milestone Mobile client, you must restart the Milestone Mobile client for
the new settings to take effect.