Privacy masking, 360 lens, 360° lens – Milestone M50 User Manual
Page 97
Milestone Husky M30/M50
Administrator's Manual
www.milestonesys.com
97
Advanced configuration
Name
Description
Detection interval
Specify how often motion detection analysis is carried out on video
from the camera. The default is every 240 milliseconds (close to
once a quarter of a second). The interval is applied regardless of
your cameras' frame rate settings.
Adjusting this setting can help lower the amount of system
resources used on motion detection.
Detection resolution
Specify whether the full image or a selected percentage of the
image should be analyzed. For example, by specifying 25%, every
fourth pixel is analyzed instead of all pixels, reducing the system
resources used but also offering less accurate motion detection.
Privacy masking
If you need to mask any areas of the camera image from viewing, set the following properties:
Name
Description
Enable
Enable the Privacy Masking feature.
Show grid
Toggle the grid on and off. Toggling the grid off may provide a less
obscured view of the preview image; selection of areas which
should be excluded from privacy masking takes place the same
way as when the grid is visible. When on, the preview image will be
divided into small sections by a grid. To define areas which should
be excluded from privacy masking, drag the mouse over the areas
in the preview image while pressing the mouse button down. Left
mouse button selects a grid section; right mouse button clears a
grid section. Selected areas are highlighted in red.
Show privacy mask
Toggle the red area indicating privacy masking on and off. Toggling
the red area off may provide a less obscured view of the preview
image.
Clear
Clear the privacy masking.
360° lens
360° lens technology allows you to view 360° panoramic video through an advanced lens. If a camera
is going to use 360° lens technology, you must enable the technology and, in some cases, enter a
special license key.
Name
Description
Enable 360° lens
Select check box to enable use of the 360° lens technology and to
be able to specify further properties.